Danish house, part 5

 Read part 1, part 2, part 3 and part 4 of this story. 

Once again, I am renovating this house for a specific purpose, and a true collector would probably be horrified, because many authentic details will be lost. I bought this house extremely cheap, and I won't ever sell it as a vintage item so I can do whatever I want with it. 

And I want a roof that looks like a house roof, not like a dollhouse roof. It's fine when the house is a toy for a child to play with, but a single-sheet roof does not look natural. So it's not just that the roof was damaged - it needed a new look. 

I carefully studied period-correct roofs (there was a very interesting discussion thread, in Swedish, about various options), and I considered using corrugated cardboard for tiles, but finally decided on plain black slates. 

I have done this before, and this time I didn't use cereal boxes, but rather recycled binders from my old students' theses that I had been saving for this purpose. They have just the right colour and texture. 

I marked the tiles with a bone folder - an indispensable tool that I originally acquired for book binding, but that proved extremely versatile. Then cut the sheet into horisontal strips and glued directly onto the roof, shifting every other strip. 

I think this picture very clearly illustrates the difference - and I almost forgot to take it. I turned some of the tiles upward a bit, to make them look more realistic. I may also sand them slightly to age them. 

It took the time it took, but I am very pleased with the result. I will probably paint the ridge black, but will keep the wooden beams. I don't like the look of the chimney but haven't yet decided what to do with it. 

Next, and as a little side project before embarking on floors, I made curtains for the living room. I wanted something unusual, and I remembered that my mother-in-law, who was very much into modern design, had curtains matching wallpaper, and this felt exactly the kind of thing a functionalist designer would do. 

It took some thinking and a few trials-and-errors, but finally I figured out how to do it. 

First, I printed out the Jacobsen wallpaper in very thin, 45-gram paper. Then I cut two bits of corrugated cardboard (the one I had discarded for roof tiles) and glued on the wallpaper to emulate folds. For rod I used a skewer, hung the curtains into jewellery jump rings and attached with eye screws. 

Of course you cannot fully draw these curtains, but they look much more realistic than most dollhouse courtains I have seen, including those in museums. 

Well, now I have no further pretexts to avoid dealing with floors and the ground-floor wallpaper, but it is a serious decision, and I need to think it through. Meanwhile, I will focus in some details, like period-correct ceiling lights. I can also make some kitchen items. Come back soon! 

Danish house, part 4

 Read part 1, part 2 and part 3 of this story. 

As I have mentioned before, the original Hanse houses had a small front gable that the previous owner had removed in favour of the middle partition. The gable has two purposes. It supports the roof when there is no partition. And it will conceal display lights when I come that far. First, I made a template from cardboard. 

For the real thing, I used foam board. 

When it dried, it looked like this: 

I think this is a lovely feature of this old house that makes it so distinct from later models and from Lundby houses. 

My next step was making windows. The original Hanse houses didn't have window frames, and maybe it was fine for children to play with, but it doesn't look natural. I wanted windows in appropriate functionalist style ("funkis"), and they are relatively easy to make from coffee stirrers and recycled folder covers. 

This is what they look like on the outside and inside: 

The ground floor window is ready, but not inserted yet because I haven't decided what I want to do with wallpaper. 

After this hard work I rewarded myself by arranging furniture including the old Brio kitchen which still needs to be designed properly. I don't know what the middle room will be so at the moment there are two "bat" chairs there. Under the stairs I have temporarily arranged a bathroom; the equipment is Renwall rather than Brio, but for the time being it will do. 

 

Next steps include floors and roof. Come back soon. 

Danish house, part 3

 Read the first and second part of this story. 

I was of course eager to go on with the interior, but I knew I would be irritated by the glue blobs so I took a deep breath and started working on them. As already mentioned, a hair dryer didn't help - who knows what kind of glue it was. The only way was to scrape off the glue carefully with a scalpel, moistering and rubbing slightly - my fingertips proved the most useful tool. You can still see that something happened there, but then it can happen in full-size houses too, and I didn't want to damage the surface. 

Then I painted the back wall. It wasn't absolutely necessary, but I don't want to have someone else's graffitti on my house. I painted with white. At some point I may paint in a matching colour. For now, it simply looks fresh. 

Next, I painted ceilings on the ground floor. In the existing pictures of Hanse houses, it is not clear what original ceilings look like, but I would paint them white anyway, in keeping with Jacobsen style. Anyone who has painted inside small rooms knows what a job it is. You need a whole set of brushes to get into all corners. I also painted the upper halves of walls in the middle and right-hand rooms. I am not sure yet whether I will keep the blue tiles, but unpainted walls don't look good. 

Now came the part that I had been looking forward to: putting up the wallpaper. I had this Jacobsen wallpaper, printed from the web, as a backdrop in the shelf with Jacobsen furniture. I think it's stunning. Jacobsen designed many papers, floors and curtains, but this is my favourite (although I am not sure I would have it in my full-size home). 

The job was both easy and hard. Easy because it is a geometrical pattern, matching neatly. Difficult because of the sloping roof and because I had to cut out openings for windows. I made templates from plain paper before I cut the fancy ones. I am very pleased with the result. I have temporarily put in a carpet from an earlier project. I have studied pictures of Jacobsen-style rooms, and they have either wall-to-wall carpets, plank or parquet. I hate wall-to-wall carpets and would never have one in my home (revomed immediately when we bought a house in England), but I feel it will be period-appropriate. I will go to an upholstery shop and beg or buy a sample for the upper floor. I haven't yet decided about the ground floor. 

As usual, I want to test the project with furniture even if it isn't finished. Suddenly the red staircase rail that looked conspicuous in the empty room goes nicely with the red sofa and chairs. I might still paint it later. 

I feel I have come a long way. But there is a lot to be done yet. Come back soon. 

Danish house, part 2

Read the beginning of this story. 

If I am not mistaken, there are three ways of dealing with antique and vintage items: preservation, restoration and renovation. With the first, the purpose is to keep the artifact exactly as it has been preserved: aged, damaged, even partially destroyed. With this approach, I would perhaps want to keep the remaining wallpaper, but I would not attempt to remove the paint, nor the partition. The house would be a monument to itself. For instance, a previous owner has left some marks on the back. For preservation strategy, these would be valuable. But I will paint them over. 

 

With restoration, you want to bring the item back to its original form. I would try to remove the paint to see if anything behind was possible to rescue, but otherwise I would try to replicate the original wallpaper by scanning the tiny bits still visible or by going online to find authentic patterns, and so on. I have already shown, in my previous post, how I have restored the original shape of the upper floor by removing the partition. In the picture below, I have found a strip of the original wallpaper that has somehow escaped the paintbrush. 

What I am doing is respectful renovation. As already mentioned, I want to display my Jacobsen collection in this house, therefore I will redecorate it to suit my purpose. It means the house will lose some of its authenticity. I will, for instance, use Jacobsen wallpaper on the upper floor. I haven't decided yet whether I will keep the wallpaper on the ground floor because it does not fit the Jacobsen design. I will definitely lay new floors, and I am strongly considering inserting window frames and glazing (I have done this before with a dollhouse I saved from the tip). There exists a Jacobsen dollhouse that fetches fancy prices at auctions, and it is quite clear from the pictures what kind of windows would be appropriate. 

So where do I start? Well, I decided to start with something really easy, like sanding away the paint. 

I wonder whether the house has been played with at all after it was painted or whether the owner didn't care about paint stains. I sanded thoroughly and then oiled the wooden beams with teak oil. 

 

Next, I needed to remove the glue. There, too, I wonder whether the owner was so totally insensitive as to ignore these glue blobs. The well-known trick of removing old glue is using a hair dryer, and that's what I tried, but it didn't really work. On the inside, I could simply scrape and sand because I would cover the surfaces with wallpaper. 

On the outside, however, I didn't want to damage the brick paper. 

After several further attempts with the hair dryer I was both exausted and frustrated so I decided to take a radical step and paint the ceiling. I felt that it would immediately make the house look fresh and cared for, and I think I was right. 

Note that, unlike the previous renovators, I have protected the wooden beams with masking tape. 

The original Hanse houses had small gables at the front, so I will add one. I think I will also paint the ground floor ceilings white. It would be consistent with the Jacobsen style. The paint is, by the way, not white white, but light cream. 

This is as far as I got. The next step will inevitably involve removing the glue on the outside, and I am not looking forward to it. Except I am - because when I have done it, the house will start looking beautiful. 

To be continued. 

Danish house

 

Last month I went to a miniature fair in Denmark, as an exhibitor. The fair wasn't very successful in terms of sales, not just for me but for everyone - nobody could explain why. I hadn't plan to buy anything, but I kept looking at a house because it looked old and interesting. I don't typically work in 1:18 scale, and I already have one house that needs renovation. However, for the past couple of years I have been collecting Danish dollhouse furniture by Arne Jacobsen that I display in a bookshelf. I have been telling myself that one day I would buy an old 1:18 house exclusively to display my Jacobsen collection. And here was this old house, and ten minutes before the fair closed I bought it at a ridiculously low price. I am still surprised that no one had bought it earlier - maybe because it was in such poor condition. I wonder whether the seller was aware what they was selling. Later I checked the current prices for this type of house so I know it was a bargain. My daughter who was there with me thought I was crazy, but it wasn't big news to her. 

Now, I don't know enough about vintage dollhouses but fortunately there are communities with expertise. I thought it was an early Lundby, but my facebook group immediately recognised it as a Danish Hanse house which certainly makes sense as I found it in Denmark. As I researched it back home, it became apparent. Symmetrical roof - and evebody knows that Lundby houses are not symmetrical. Also several features were conspicuous, such as the stairs. 

I have been busy with all kinds of things recently so it's not until now I have some time to take a closer look. 

To begin with, the partition on the upper floor is a late addition - original Hanse houses didn't have it. At closer look, the partition had a very odd sized door, just 8 cm high. The walls on the ground floor have no doors, but they don't go all the way to the front, so a kind of pretence doors. Another typical Hanse feature. 

The wallpaper on the ground floor seems authentic, but on the upper floor the walls have been painted, and not very carefully. Floors in one room were badly damaged. 

From the pictures I have found on the web, floors are original. I have also been told that the house didn't have window frames and glazing. 

Somebody repaired the wall in a most horrendous manner - just look at the glue!

The bottom was water damaged. Not much I can do about it, maybe just give it a protective coat of paint.

I am not sure what the round things in the corners are. Maybe the house stood on legs. 

I took a deep breath and started. 

The first thing was to remove the partition which was easy because it had also been fixed quite carelessly. With the partition removed, you can see original wallpaper. 

I won't restore the original wallpaper because I intend, as already mentioned, to use the house to display Jacobsen furniture. I will have Jacobsen wallpaper, and I will research what kind of floors and ceilings would go with Jacobsen design. 

Just to cheer myself up, after realising the scope of necessary work, I put some Jacobsen items into the upper-floor room. With the partition, it wouldn't look half as nice. 

I am not sure where to start, but probably I need to make all the major repairs before I can go on. Mend the hole in the floor. Remove the glue. Sand away old paint. I am sure I will discover more faults as I go. I believe this will take me the whole summer, particularly if it rains. I will report regularly so please come back. 

To be continued.